Site Prep project guide

Site Prep contractors cost and hiring guide

Everything between raw land and a buildable pad: clearing, stripping, cutting, filling, compaction and the construction entrance.

Project guide

Hiring site prep contractors

Site preparation is the package of work that turns a lot into a place a builder can start. On a typical job that means clearing vegetation, stripping and stockpiling topsoil, cutting or filling to the pad elevation, compacting fill in lifts, cutting in a temporary driveway, and installing the silt fence and gravel entrance the stormwater inspector expects to see. The scope shifts with the ground: a flat suburban infill lot may take two days, while a sloped wooded parcel with poor soil can run weeks and involve undercutting and replacing unsuitable material. Site prep contractors typically coordinate with the surveyor who sets the corners and the geotechnical engineer who signs off on compaction.

GradeLine lists 479 site prep contractors.Compare their work and equipment, then confirm availability and service area before requesting a quote.

Listed businesses are based in Lakeland, Wewahitchka, Huntsville, College Station, Lake Butler, Granbury, though most crews travel well beyond their home city.

What site prep work costs

A straightforward residential lot typically runs $3,000 to $15,000 for clearing, stripping and pad grading, with heavily wooded, sloped or poorly drained parcels going well past that. Imported structural fill adds $10 to $30 per cubic yard delivered, and undercutting bad soil is one of the most common change orders on a site prep job.

Ranges are national and approximate; regional labor rates, material prices and site conditions move them in both directions.

Common projects

Residential and commercial building pads cut, filled and compacted to the geotechnical report
Temporary construction entrances, access roads and staging areas
Topsoil stripping, undercut of unsuitable soil and import of structural fill

What affects a quote

Vegetation and debris on the lot, and whether it is chipped, burned, hauled or buried on site
Volume of cut and fill, the lift thickness and compaction spec, and whether a testing lab is required
Slope, access, drainage across the lot, weather windows and how much room there is to stockpile

Site Prep FAQ

What does site prep work cost?

What should I share when requesting a site prep estimate?

Send the site plan, the survey with pad elevations, any geotechnical or soil report, and the order the trades will arrive so the contractor can leave the site the way the foundation crew needs it.

What can change the cost of site prep work?

The main cost items are vegetation and debris on the lot, and whether it is chipped, burned, hauled or buried on site; volume of cut and fill, the lift thickness and compaction spec, and whether a testing lab is required; slope, access, drainage across the lot, weather windows and how much room there is to stockpile. A site visit helps the crew see which ones apply.

Do site prep projects need permits?

Site prep usually runs under the main building permit, but grading, land disturbance and stormwater permits are often separate and must be in hand before the first tree comes down. Lots on a public road need a driveway access permit for the construction entrance.

Browse by state

Find site prep contractors near you

Pick a state to see the site prep contractors listed there. Most crews travel well beyond their home city, so confirm the service area before requesting a quote.

Site Prep in Texas Site Prep in Arizona Site Prep in Florida

Contractor directory