Pond / Water Management contractors in Tennessee

Project guide

Hiring pond / water management contractors in Tennessee

Pond and water management contractors excavate and shape ponds, build or repair the embankment dams that hold them, and cut the ditches, swales and channels that move water across a property. A pond that holds water starts with the soil: it needs a clay core or a compacted clay liner, or a synthetic liner where the ground is sandy or rocky, and the dam is built in compacted lifts with a keyway cut into the original ground. Every pond also needs a way to pass the big storm, usually a principal spillway pipe plus an emergency spillway cut in natural ground, sized for the watershed above it. USDA NRCS publishes free design standards for farm ponds that most contractors follow. Cleanouts, which remove years of silt and reshape banks, are common on older ponds and are priced by the cubic yard removed and where that muck can be spread.

GradeLine lists 116 pond / water management contractors that serve Tennessee.Compare their work and equipment, then confirm availability and service area before requesting a quote.

Listed businesses are based in Oak Grove, Guthrie, , Nashville, Seymour, Dowelltown, though most crews travel well beyond their home city.

What pond / water management work costs

Small ponds are usually priced per cubic yard excavated, about $2 to $6 in workable soil, so a half-acre pond commonly lands in the $5,000 to $25,000 range. Synthetic liners add $1 to $2 per square foot and imported clay can double the earthwork cost. Pond cleanouts run $3 to $8 per cubic yard of muck depending on how wet it is and how far it has to be moved.

Ranges are national and approximate; regional labor rates, material prices and site conditions move them in both directions.