Excavation work on a jobsite in New Mexico

Excavation in New Mexico

Excavation contractors in New Mexico

Foundation digs, utility trenches, pool holes and bulk earthmoving, priced by the yard or by the hour.

View contractors

Project guide

Hiring excavation contractors in New Mexico

Excavation contractors dig and move earth for foundations, basements, utilities, pools and site cuts. Most residential jobs run on a mini or mid-size excavator paired with a skid steer and a dump truck; larger cuts bring in a dozer or scraper. The price depends less on the size of the hole than on what is in the ground: clay, ledge rock, high groundwater and buried utilities all slow the machine down and change the hauling math. Before the bucket touches dirt the site needs an 811 utility locate, and any trench deeper than five feet needs a protective system under OSHA rules.

GradeLine lists 192 excavation contractors that serve New Mexico.Compare their work and equipment, then confirm availability and service area before requesting a quote.

Listed businesses are based in Santa Fe, Carlsbad, , Chimayo, Ruidoso Downs, Edgewood, though most crews travel well beyond their home city.

What excavation work costs

Bulk excavation is usually priced per cubic yard, roughly $2 to $8 for ordinary soil and $40 to $100 or more where rock has to be hammered or blasted. Hourly work with an operator typically runs $100 to $250 for a mid-size excavator, often with a half-day minimum. A basement dig for a typical house lands in the $3,000 to $15,000 range before hauling; a short utility trench can be a few hundred dollars.

Ranges are national and approximate; regional labor rates, material prices and site conditions move them in both directions.

Common projects

  • Basement, crawl space and slab foundation digs to engineered depth
  • Trenches for water, sewer, gas, electrical and storm drain lines
  • Pool excavation, driveway cuts and bulk earthmoving for site grading

What affects a quote

  • Soil type and rock: clay, caliche and ledge cost several times more per yard than loam
  • Depth, cubic yards and whether a machine can reach the work without matting or a long carry
  • Where the spoil goes: haul-off and dump fees versus stockpiling on site, plus any import fill

Excavation FAQ

What does excavation work cost?

Bulk excavation is usually priced per cubic yard, roughly $2 to $8 for ordinary soil and $40 to $100 or more where rock has to be hammered or blasted. Hourly work with an operator typically runs $100 to $250 for a mid-size excavator, often with a half-day minimum. A basement dig for a typical house lands in the $3,000 to $15,000 range before hauling; a short utility trench can be a few hundred dollars.

What should I share when requesting an excavation estimate?

Send the site plan or a sketch with dimensions, the target depth, gate and driveway width for equipment access, and anything you know about the soil, the water table or where old lines run.

What can change the cost of excavation work in New Mexico?

The main cost items are soil type and rock: clay, caliche and ledge cost several times more per yard than loam; depth, cubic yards and whether a machine can reach the work without matting or a long carry; where the spoil goes: haul-off and dump fees versus stockpiling on site, plus any import fill. A site visit helps the crew see which ones apply.

Do excavation projects in New Mexico need permits?

Call 811 at least two to three business days before digging; it is free and required in every state. Foundation and pool excavation typically falls under the building permit, and trenches in the public right-of-way need a separate road opening or encroachment permit.

Directory

Excavation contractors serving New Mexico

192 contractors found

Need a excavation contractor in your area?

Tell us about the job and add photos. A local pro calls you back. Free, and no spam.

Request services