Trenching / Underground work on a jobsite in Washington

Trenching / Underground in Washington

Trenching / Underground contractors in Washington

Water, sewer, gas, electric, irrigation and drainage lines put in the ground to spec, with 811 locates, shoring and bedding handled right.

View contractors

Project guide

Hiring trenching / underground contractors in Washington

Trenching and underground utility contractors open the ground for pipe and conduit, bed and backfill it, and put the surface back. What looks like a straight line on a plan is governed by a few hard numbers: 811 locates before any digging, a minimum cover depth that varies by utility (commonly 18 to 24 inches for electric and gas service, and below the frost line for water), and OSHA's requirement that any trench five feet or deeper have a protective system such as a trench box, shoring or a sloped wall, with a competent person on site. Bedding material under the pipe, compaction of the backfill in lifts and tracer wire on non-metallic pipe are the details that separate a line that lasts fifty years from one that settles and cracks the driveway above it.

GradeLine lists 209 trenching / underground contractors that serve Washington.Compare their work and equipment, then confirm availability and service area before requesting a quote.

Listed businesses are based in BENTON CITY, ARLINGTON, SILVERDALE, UNION GAP, MARYSVILLE, SEATTLE, though most crews travel well beyond their home city.

What trenching / underground work costs

Simple trenching in soft soil is often priced per linear foot, roughly $4 to $12 for shallow runs and $10 to $30 or more when depth, rock or shoring come into play. A residential water or sewer service replacement typically runs $3,000 to $12,000 depending on length, depth and how much pavement has to be cut. Directional boring under driveways and roads is priced separately, often $10 to $30 per foot.

Ranges are national and approximate; regional labor rates, material prices and site conditions move them in both directions.

Common projects

  • Water, sewer and gas service lines from the main to the house, including tie-ins and taps
  • Electrical, telecom and fiber conduit runs, plus direct-burial cable trenches
  • French drains, storm laterals, culverts and irrigation mains

What affects a quote

  • Trench length, depth and width, and whether the route crosses pavement, tree roots or other utilities
  • Soil, rock and groundwater, which decide whether a trencher, an excavator or dewatering is needed, and whether shoring is required
  • Bedding stone, compacted backfill, pipe material, and restoration of grass, gravel or concrete over the top

Trenching / Underground FAQ

What does trenching / underground work cost?

Simple trenching in soft soil is often priced per linear foot, roughly $4 to $12 for shallow runs and $10 to $30 or more when depth, rock or shoring come into play. A residential water or sewer service replacement typically runs $3,000 to $12,000 depending on length, depth and how much pavement has to be cut. Directional boring under driveways and roads is priced separately, often $10 to $30 per foot.

What should I share when requesting a trenching / underground estimate?

Send the route on a plot plan, the pipe or conduit size, the connection points at both ends, target depth if the utility has told you one, and how you want the surface restored.

What can change the cost of trenching / underground work in Washington?

The main cost items are trench length, depth and width, and whether the route crosses pavement, tree roots or other utilities; soil, rock and groundwater, which decide whether a trencher, an excavator or dewatering is needed, and whether shoring is required; bedding stone, compacted backfill, pipe material, and restoration of grass, gravel or concrete over the top. A site visit helps the crew see which ones apply.

Do trenching / underground projects in Washington need permits?

Utility work in the public right-of-way needs a road opening permit and often a bond. Sewer, water and gas connections require plumbing or utility permits with an open-trench inspection, and gas lines must be pressure tested before backfill. 811 is required by law in every state and locates are free.

Directory

Trenching / Underground contractors serving Washington

209 contractors found

Need a trenching / underground contractor in your area?

Tell us about the job and add photos. A local pro calls you back. Free, and no spam.

Request services