Pond / Water Management work on a jobsite in Rhode Island

Pond / Water Management in Rhode Island

Pond / Water Management contractors in Rhode Island

Farm and recreation ponds, cleanouts, dams and drainage channels shaped to hold water and pass storms safely.

Project guide

Hiring pond / water management contractors in Rhode Island

Pond and water management contractors excavate and shape ponds, build or repair the embankment dams that hold them, and cut the ditches, swales and channels that move water across a property. A pond that holds water starts with the soil: it needs a clay core or a compacted clay liner, or a synthetic liner where the ground is sandy or rocky, and the dam is built in compacted lifts with a keyway cut into the original ground. Every pond also needs a way to pass the big storm, usually a principal spillway pipe plus an emergency spillway cut in natural ground, sized for the watershed above it. USDA NRCS publishes free design standards for farm ponds that most contractors follow. Cleanouts, which remove years of silt and reshape banks, are common on older ponds and are priced by the cubic yard removed and where that muck can be spread.

GradeLine lists 5 pond / water management contractors that serve Rhode Island.Compare their work and equipment, then confirm availability and service area before requesting a quote.

Listed businesses are based in Warwick, North Kingstown, Charlestown, West Warwick, , though most crews travel well beyond their home city.

What pond / water management work costs

Small ponds are usually priced per cubic yard excavated, about $2 to $6 in workable soil, so a half-acre pond commonly lands in the $5,000 to $25,000 range. Synthetic liners add $1 to $2 per square foot and imported clay can double the earthwork cost. Pond cleanouts run $3 to $8 per cubic yard of muck depending on how wet it is and how far it has to be moved.

Ranges are national and approximate; regional labor rates, material prices and site conditions move them in both directions.

Common projects

New farm, livestock, irrigation and recreational ponds with clay or synthetic liners
Pond cleanouts, dredging, bank reshaping and dam repair on existing ponds
Drainage ditches, swales, dry basins, culverts and water control structures

What affects a quote

Cubic yards of excavation and whether the on-site soil will hold water or a liner and imported clay are needed
Dam height, spillway pipe and riser, drain valve, and pump or well components
Where the spoil goes, erosion control on the fresh banks, and seeding or riprap to finish

Pond / Water Management FAQ

What does pond / water management work cost?

What should I share when requesting a pond / water management estimate?

Send a survey or aerial with the pond location, the size and depth you want, what feeds it, whether you plan to stock fish or irrigate from it, and where excavated material can be placed.

What can change the cost of pond / water management work in Rhode Island?

The main cost items are cubic yards of excavation and whether the on-site soil will hold water or a liner and imported clay are needed; dam height, spillway pipe and riser, drain valve, and pump or well components; where the spoil goes, erosion control on the fresh banks, and seeding or riprap to finish. A site visit helps the crew see which ones apply.

Do pond / water management projects in Rhode Island need permits?

Ponds built in or near a stream, wetland or floodplain usually need a U.S. Army Corps of Engineers Section 404 permit and state water quality certification. Dams over a set height or storage volume fall under state dam safety programs, and many counties require a grading permit for the earthwork.