Demolition work on a jobsite in New Mexico

Demolition in New Mexico

Demolition contractors in New Mexico

Whole-structure teardowns, selective interior demolition and slab removal, with the utility disconnects and asbestos survey done first.

View contractors

Project guide

Hiring demolition contractors in New Mexico

Demolition contractors take down houses, garages, commercial buildings and foundations, then sort and haul what is left. The teardown itself is the fast part; most of the schedule is the paperwork that has to happen first. Gas, electric and water are disconnected and capped at the main, an asbestos survey is completed by a licensed inspector and any friable material is abated before the excavator swings, and the demolition permit is posted. A residential house typically comes down in one to two days with a 30 to 40 ton excavator; hauling and backfilling the hole can take a few more. Selective demolition, such as removing a wing or gutting an interior for a remodel, is priced by labor hours because it is done with hand tools and small machines around what stays.

GradeLine lists 13 demolition contractors that serve New Mexico.Compare their work and equipment, then confirm availability and service area before requesting a quote.

Listed businesses are based in , Carlsbad, Albuquerque, Ranchos de Taos, Española, Los Ranchos de Albuquerque, though most crews travel well beyond their home city.

What demolition work costs

Residential demolition typically runs $4 to $10 per square foot, so a 1,500 square foot house lands around $8,000 to $18,000 including haul-off, more with a basement. Detached garages and outbuildings commonly cost $2,000 to $8,000. Asbestos abatement, when needed, is billed separately and can range from a few hundred dollars for pipe wrap to five figures for siding or floor tile throughout.

Ranges are national and approximate; regional labor rates, material prices and site conditions move them in both directions.

Common projects

Full residential teardowns including slab, foundation and basement removal
Garage, barn, mobile home, pool and outbuilding demolition
Selective and interior demolition for additions, remodels and structural repairs

What affects a quote

Building size, framing type and whether a basement or thick slab has to come out
Asbestos and lead survey results, abatement, and the cost of the utility disconnects
Tonnage of debris, landfill tipping fees, recycling of concrete and metal, and the fill needed to close the hole

Demolition FAQ

What does demolition work cost?

What should I share when requesting a demolition estimate?

Gather any building records, drawings or prior inspection reports, mark septic tanks, wells, propane tanks and buried lines, and say up front what you want salvaged before the machine arrives.

What can change the cost of demolition work in New Mexico?

The main cost items are building size, framing type and whether a basement or thick slab has to come out; asbestos and lead survey results, abatement, and the cost of the utility disconnects; tonnage of debris, landfill tipping fees, recycling of concrete and metal, and the fill needed to close the hole. A site visit helps the crew see which ones apply.

Do demolition projects in New Mexico need permits?

Nearly every jurisdiction requires a demolition permit, and most will not issue it without proof of utility disconnects and an asbestos survey. Buildings in historic districts, those over a certain age, and commercial structures under EPA NESHAP rules carry extra notification periods, often ten working days.